2 3/4 " Turkey loads in 12 gauge ?

Your place to talk about anything and everything hunting-related!
Jrhunter25
 
Posts: 25
Joined: December 2nd, 2013, 10:23 pm

2 3/4 " Turkey loads in 12 gauge ?

Postby Jrhunter25 » December 6th, 2013, 2:00 pm

What are some good #5 or #4 shot 2 3/4" loads for turkey ( Lead ) ? Would like to be able to use it up too 30 yards.

misoiltester
 
Posts: 320
Joined: January 29th, 2012, 2:58 pm

Re: 2 3/4 " Turkey loads in 12 gauge ?

Postby misoiltester » December 7th, 2013, 9:05 am

Jr., You'll probably have to look and see what is available in 4 & 5 lead loads. In a 12, you should be able to get a good fast, yet heavy ,1 1/4 oz magnum load in a 2 3/4" shell ;)

I use to reload & shoot(well still do on ocasions) a hot #5 lead, 1 1/4 oz, reload, that is as fast and equal to a mag. load :o
Ever wonder where the white goes when the snow melts????

User avatar
Treerooster
 
Posts: 652
Joined: May 5th, 2008, 3:48 am
Location: Colorado

Re: 2 3/4 " Turkey loads in 12 gauge ?

Postby Treerooster » December 7th, 2013, 1:44 pm

Winchester Supreme High Velocity or their XX turkey shells are pretty good. I think they shoot 1 1/2 ounce of shot and come in 4, 5, or 6 shot. I am sure there are other 2 3/4 inch shells that would work, especially if you are only going to 30 yards.

Either of the above shells will have enough pellet energy to kill a turkey out to 45 yards (in any shot size 4, 5, or 6). But you MUST also have the pattern density. A turkey is shot in the head & neck but the vital area that actually kills the turkey is the skull and vertebrae of the turkey. This is a considerably smaller area than the head & neck. I like to see a pattern dense enough to give me 4 or 5 hits in the skull & vertebrae at my max range to kill a turkey. I use 6 shot.

My pal Skully here shows you the vitals on a turkey and you can eliminate the beak and the eye socket area.

Image
As far as this turkey thing......I know enough...to know enough...that I don't know enough

User avatar
WillowRidgeCalls
 
Posts: 3489
Joined: May 25th, 2009, 4:26 pm
Location: Reeseville Wisconsin

Re: 2 3/4 " Turkey loads in 12 gauge ?

Postby WillowRidgeCalls » December 7th, 2013, 2:33 pm

Winchester, Federal, or Fiocchi, all make a good 2-3/4" shell that will take a bird out to 35-40 yds.
I shoot the Fiocchi 12ga 2-3/4", 1-3/8oz nickel plated, 1485 fps, Golden Pheasant high velocity loads in my sxs and have no problems taking birds out to 35 yds with a full or mod choke. They hold a great pattern better than most I've seen. They sell for about $18. per 25 shells in 4, 5, 6.
WillowRidgeCalls
WI Youth & LTH Mentor
Dodge Co. NWTF
Scott


Return to Talkin' Turkey • General discussion

Who is online

Users browsing this forum: Bing [Bot] and 12 guests